Filter media · Code Y
Polyester string wound filter cartridges
Polyester gives you chemical resistance similar to polypropylene, with a much higher temperature limit of 350°F. It is a good step up when a polypropylene cartridge would run too hot.
Max media temperature
350°F
Media code
Y
Micron ratings
0.5–200
FDA grade
Not offered
Where polyester works
- Dilute and strong acids
- Chemical service above polypropylene’s 180°F limit
- Oils and solvents at elevated temperature
Media codes
| Code | Media |
|---|---|
| Y | Polyester |
Choosing a core
To use polyester’s full 350°F rating, pair it with a stainless steel core. A polypropylene core limits the cartridge to 180°F.
| Code | Core | Typical service | Max operating temp with polyester | FDA material |
|---|---|---|---|---|
| P | Polypropylene | Water and corrosives | 180°F (core-limited) | Yes |
| T | Tin-plated steel | Oils and solvents | 350°F | No |
| S | 304 stainless steel | Diluted acids | 350°F | Yes |
| A | 316 stainless steel | Strong acids | 350°F | Yes |
Example part numbers
Part numbers read Media – Micron – Diameter – Length – Core – End cap. Standard lengths run 9¾" to 40" and our standard outside diameter is 2½" (code R).
Configure a polyester cartridge
Pick the micron rating, length, core and end cap, then print a spec sheet or send us a quote request.